Mobile solution

Showing posts with label with. Show all posts

Showing posts with label with. Show all posts

Thursday, November 20, 2014

Send incoming calls to voicemail with HTC EVO

The HTC EVO smartphone runs on the Android mobile operating system from Google . The EVO lets you control when receiving calls and when sent directly to voicemail . You can choose between many different ways to send calls to voicemail , each with a slightly different effect.
Declines the call

When declining an incoming call rather than answer , the call is sent directly to your phone voice mailbox . This method to send calls to voicemail does not require any configuration change and can be done directly from the display of the incoming call. To decline a call, tap the red button "Ignore " on incoming call Lcd instead of the button " Reply " .Airplane ModePut your device into Airplane mode disables all wireless connections on the device. You can not connect via Bluetooth or the web via Wi-Fi or 4G , and you can not make or receive any calls. Demands are sent directly to your voicemail . To place your device in Airplane Mode , press and hold the power button until the menu appears and plays the "Airplane Mode " option.Mode DDTMThe DDTM mode prevents incoming texts and calls interrupt your data connection. Unlike the Airplane Mode , this mode does not disconnect the Bluetooth, WiFi or 4G, but sends all incoming calls directly to voicemail . To place your device in this mode, press the "Menu " button and tap the "Settings " option. Then tap the "Calls " tab and place a check mark in the " DDTM Mode" option .disable networkIf you disable the network from your device , you can not receive any phone calls and send any incoming calls directly to your voicemail. To disable the network , tap the "Menu" button, then the "Settings " option. Tap the " Wireless Networks " tab and remove the check mark next to the " Mobile Network" .

Wednesday, November 12, 2014

Nokia 110 No Power On with Battery Problem Solution

1-Nokia 110 is not getting power on with battery.
2-Nokia 110 is dead and not getting power on with battery.
3-But it can be switch on with direct power suplly of 4v.

Nokia

Tools:-
To solve this problem you should have
1-Any electronics cleaner.
2-Hot Air Machine.
3-Solding Iron.
4-And same mother board if a few components required.
Solution:-
1-Check Nokia 110 with new battery and try to switch on.
2-If it can not be power on with battery then check with Power Supplu.
3-Disassamble Nokia 110 and look at mother board very carefully.
4-If there is some rust or carbon on board then clean it with electronics cleaner.
5-Apply hot air with Hot air gun. Here should not be much heat because it can harm you and Mobile
Phone.
6-Check Mobile phone with battery if it can be power on with it.
7-If not working with above process then change these parts as shown in above diagram.
Warnings:-
1-Do not apply to much heat it can be harm for your skin and mobile.
2-Do not apply to much cleaner it can be cause of rust or carbon if you do not make your phone dry.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update daily this blog timely with other mobile solution.

Friday, October 31, 2014

Nokia e52 fake charging solution with Ic

when you plug in charge to charging pin of nokia e52 and it shows charging indication but do not charge the battery. It can be the fault of charging IC that is given in repairing diagram of nokia e52 for not charging or fake charging.

dis assemble the mobile phone and then find out if there is rust water damages or burn and carbon on the smart phone mobile.Clean the mother board with electronics cleaner and apply some heat with hot air to make it dry.
Re sold the Ic and Re flow it. If resolding can not solve not charging or fake charging problem in nokia e52 replace this IC that is used for Charging function of nokia e52.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Monday, September 8, 2014

Nokia E63 Charging not supported Problem with Jumper Solution

Nokia E63 Charging not supported solution.

Nokia

Thursday, September 4, 2014

iPhone 3G when no sync with pc USB solution

Make only if L11 missing,water damaged or bad

Wednesday, September 3, 2014

Nokia 1616 mic Problem with Jumper Solution

Thursday, August 28, 2014

Nokia 5530 flash light Problem with Jumper Solution

Nokia 5530 Xpress music flash light solution.

5530

Wednesday, August 27, 2014

Nokia N81 buzzer Problem with Jumper Solution

Nokia N81 buzzer solution.

Nokia

Tuesday, August 26, 2014

How to Share Content with DLNA Certified Devices on Sony Xperia Z1

Playing files from DLNA Certified™ devices on your device

When you play files from another DLNA Certified™ device on your device, this other device acts as a server. In other words, it shares content over a network. The server device must have its content sharing function enabled and give access permission to your device. It also must be connected to the same Wi-Fi® network as your device.

To play a shared track on your device

1. Make sure the devices that you want to share files with are connected to the same Wi-Fi® network as your device.
2. From your Home screen, tap

, then find and tap WALKMAN.
3. Select a device from the list of connected devices.
4. Browse the folders of the connected device and select the track that you want to play. The track starts playing automatically.

To play a shared video on your device

1. Make sure the devices that you want to share files with are connected to the same Wi-Fi® network as your device.
2. From your Home screen, tap

, then find and tap Movies.
3. Select a device from the list of connected devices.
4. Browse the folders of the connected device and select the video that you want to play.

To view a shared photo on your device

1. Make sure the devices that you want to share files with are connected to the same Wi-Fi® network as your device.
2. From your Home screen, tap

.
3. Find and tap Album > My albums. All your available online albums and connected devices are displayed.
4. Select a device from the list of connected devices.
5. Browse the folders of the connected device and select a photo to view it.

Preparing to play content from your device on DLNA Certified™ devices

You must set up file sharing on your device first before you can view or play media files from other DLNA Certified devices. Your device works as a media server when it makes content available to client devices. When you set up file sharing on your device, you must also give access permission to client devices. After you do so, such devices appear as registered devices. Devices that are waiting for access permission are listed as pending devices.

To stop sharing files with other DLNA Certified™ devices

1. From your Home screen, tap

.
2. Find and tap Settings > Xperia™ Connectivity > Media server settings.

To set access permissions for a pending device

1. From your Home screen, tap

.
2. Find and tap Settings > Xperia™ Connectivity > Media server settings.
3. Select a device from the Pending devices list.
4. Select an access permission level.

To change the name of a registered device

1. From your Home screen, tap .
2. Find and tap Settings > Xperia™ Connectivity > Media server settings.
3. Select a device from the Registered devices list, then select Change name.
4. Enter a new name for the device.

To change the access level of a registered device

1. From your Home screen, tap

.
2. Find and tap Settings > Xperia™ Connectivity > Media server settings.
3. Select a device from the Registered devices list.
4. Tap Change access level and select an option.

To get help about sharing content with other DLNA Certified™ devices

1. From your Home screen, tap

.
2. Find and tap Settings > Xperia™ Connectivity > Media server settings.
3. Tap Question mark icon.

How to Share Content with DLNA Certified Devices on Sony Xperia Z2

Playing files from DLNA Certified™ devices on your device

When you play files from another DLNA Certified™ device on your device, this other device acts as a server. In other words, it shares content over a network. The server device must have its content sharing function enabled and give access permission to your device. It also must be connected to the same Wi-Fi® network as your device.

To play a shared track on your device

1. Make sure the devices that you want to share files with are connected to the same Wi-Fi® network as your device.
2. From your Home screen, tap

, then find and tap WALKMAN.
3. Select a device from the list of connected devices.
4. Browse the folders of the connected device and select the track that you want to play. The track starts playing automatically.

To play a shared video on your device

1. Make sure the devices that you want to share files with are connected to the same Wi-Fi® network as your device.
2. From your Home screen, tap

, then find and tap Movies.
3. Select a device from the list of connected devices.
4. Browse the folders of the connected device and select the video that you want to play.

To view a shared photo on your device

1. Make sure the devices that you want to share files with are connected to the same Wi-Fi® network as your device.
2. From your Home screen, tap

.
3. Find and tap Album > My albums. All your available online albums and connected devices are displayed.
4. Select a device from the list of connected devices.
5. Browse the folders of the connected device and select a photo to view it.

Preparing to play content from your device on DLNA Certified™ devices

You must set up file sharing on your device first before you can view or play media files from other DLNA Certified devices. Your device works as a media server when it makes content available to client devices. When you set up file sharing on your device, you must also give access permission to client devices. After you do so, such devices appear as registered devices. Devices that are waiting for access permission are listed as pending devices.

To stop sharing files with other DLNA Certified™ devices

1. From your Home screen, tap

.
2. Find and tap Settings > Xperia™ Connectivity > Media server settings.

To set access permissions for a pending device

1. From your Home screen, tap

.
2. Find and tap Settings > Xperia™ Connectivity > Media server settings.
3. Select a device from the Pending devices list.
4. Select an access permission level.

To change the name of a registered device

1. From your Home screen, tap .
2. Find and tap Settings > Xperia™ Connectivity > Media server settings.
3. Select a device from the Registered devices list, then select Change name.
4. Enter a new name for the device.

To change the access level of a registered device

1. From your Home screen, tap

.
2. Find and tap Settings > Xperia™ Connectivity > Media server settings.
3. Select a device from the Registered devices list.
4. Tap Change access level and select an option.

To get help about sharing content with other DLNA Certified™ devices

1. From your Home screen, tap

.
2. Find and tap Settings > Xperia™ Connectivity > Media server settings.
3. Tap Question mark icon.

Sunday, August 24, 2014

Nokia C3 00 lcd Light Problem with Jumper Solution

Nokia C3-00 Light solution.

Nokia

Saturday, August 23, 2014

Nokia 1616 charging no response Problem with Jumper Solution

Nokia 1616 charging no response solution.

Nokia

Tuesday, August 19, 2014

Nokia 5530 Insert sim Problem with Jumper Solution

Nokia 5530 Xpress music Insert sim solution.

Nokia

Monday, August 18, 2014

How to sync Contacts on Android with Gmail Account

Android users that love to customize their devices should know that they can easily sync the Contacts stored in their phone with the device’s designated Gmail account.
This trick helps you keep your phone, Google+ contacts and all the other profiles synced with your Gmail Account, the one you’re using the Google Play Store and with all the other Google services. This feature is great and you can easily perform all the changes and syncing in several steps.
Syncing contacts with Gmail account comes in handy when you want to root/ update the firmware of your phone. As you know, while rooting or updating firmware you’re risking to damage data files, SMS text messages and contacts that could get corrupted or lost. That’s the reason I’ve created this article, to help you sync the stored Contacts in your Android phone with your Gmail account successfully.
Before moving to the tutorial guide you need to make sure that your Contacts are linked with the Gmail Account.

Open Contacts.
Press the Menu/ Settings button.
Select ‘Merge with Google’ and then confirm the action. In case you have more than one Gmail accounts then select the one you wish to use as default to host your contacts.
When everything has been successfully merged, a pop-up message will notify you.

Here’s how to sync your contacts with the Gmail account:

Make sure that you have Gmail installed on your device.
Open the App Drawer and go to Settings, then go to ‘Accounts and Sync’.
Enable the Accounts and syncing service.
Select your Gmail account from the e-mail accounts setup .
Make sure that you’ve enabled ‘Sync Contacts’ option.
Press ‘Sync now’ button and wait until all the phone contacts have been successfully synchronized with your gmail account.
Now open Gmail in your computer’s web browser and click the Gmail text link that is listed on the upper left side of the Gmail profile.
Select Contacts and then you should see a page where all the contacts from your Android smartphone have been stored.

That should do it. If you have any other extra questions then please feel free to ask me in comments.
After you’ve backed up/ synced contacts from your Android phone and then you’ve also changed the ROM or, you’ve rooted the phone and selected factory reset, then you will need to sync again the Gmail account with your phone and, all the phone numbers will be restored. Otherwise all the contacts will be removed from your phone.

Friday, August 15, 2014

Update Motorola Defy Plus with Android 4 0 4 Custom ICS Firmware Free Download

Motorola devices are awaiting the big update of Android 4.0 Ice Cream Sandwich and Motorola seems to delay the launch of these products. Whether official updates comes or not users can update with the custom ROM and the here comes one such in the form of Android 4.0.4 on your phone to the Motorola Defy smartphone.
Motorola Defy +

Motorola Defy +

Here in this article we will go through the procedure on how you can install the Android 4.0.4 on your Defy Plus smartphone. Let me mention you that this version of the firmware is not the officially released by Motorola and this is a custom developed ROM and to apply this update you need to have your devices rooted on the current firmware which you are on.

It has been continuous discussion on what works or not, let me tell you that this firmware just has the issues with the stock browser crashes while you switch between the tabs and remaining everything like camera, theme, multi boot works perfectly on your device.
Pre Upgrade Instructions
You should go through the following pre upgrade instructions –
Before we proceed with the steps to install the the custom Android ICS ROM follow the pre upgrade instructions here -

Make sure that this update is only for the users who own Motorola Defy Plus smartphone but not any other version.
Make sure that your smartphone is rooted.
Please make sure that you have more than 70 % battery life left on your phone.
Need to take a backup of various applications and files on your device, follow the below guide to back them individually –
SMS – Use “SMS Backup & Restore app”,
Contacts – Sync with the Gmail application,
Call Log - Call Log and Restore
Songs, Videos & Files – Copy to internal / External SD Card,
APN and MMS Settings – Note down manually via “Applications > Settings > Wireless and Network > Mobile Networks > Access Point Names”.
Make sure that you need to have USB Debugging installed on your device. Go to Settings > Applications > Development > USB debugging” and you should tick the USB debugging option.

Disclaimer : Since this is a custom firmware, users should understand that they are proceeding with this update on their own risk. Neither developer nor we would be held responsible for anything happens to your device but we ensure that everything works fine.
Update Motorola Defy+ with ICS 4.0.4 Firmware Procedure

First you need to download the latest ICS for the Motorola Defy + and also the Google Apps package separately as well and both of them are separate files.
Once the download of the files are completed on your PC, you need to connect your phone using the USB cable to the PC and then place these two files on the root of your SD card.
Disconnect the USB connection and power off your smartphone, so that you can boot in the recovery mode.
One can easily enter Motorola Defy + smartphone in the recovery mode by using the various keys combination of Volume down, power button together at once. Release button when you see the recovery menu.
Up next you need to select “install zip from sd card” > “choose zip from sd card” and browse for the firmware package you have downloaded earlier. Here in the recovery mode you can make use of the volume up and down keys to navigate between the options and to select an highlighted option you need to press the power button.
Once that is applied you would be taken back to the recovery mode screen.
Now repeat the procedure of “install zip from sd card” > “choose zip from sd card” for the Google Apps package.
Now return back to the recovery menu screen and select “reboot system now” to reboot your device and see the phone with the firmware.

With that procedure you have updated your Motorola Defy + with the custom based Android 4.0.4 Ice Cream Sandwich firmware until the official arrives.
Source

What others Searched for:samsung defy,MOTOROLA DEFY,moto defy,motorola defy android,motorola defy plus,Motorola moto defy,motorola ace,motorola,motorolla defy.

Thursday, August 14, 2014

How to Unbrick Your Samsung Android Phones with One Click UnBrick Guide

Normally Samsung android phones are so secure to flash. But you are unlucky and got your phone bricked during flashing, rooting or upgrading.

Here is a good news for You – A developer come up with a software called One-Click UnBrick for Samsung android phones. This small utility uses Odin to repair our Samsung phones. Almost all Samsung phones with android éclair and above can be repair with this tool (few exceptions – it is working on some Android 1.5 too)
Requirements

Install Samsung USB Driver for Mobile Phones on the computer.
Install Java Runtime Environment (JRE) on the computer.
Download One-Click UnBrick tool.

Complete Step-By-Step Instructions:

Extract the "One-Click.jar" file using 7zip or any other extracting tool. Now you will get a "OneClick" folder.
Copy the "OneClick.jar" file and paste it into the "OneClickheimdalloneclick esourcesHeimdallPackage" folder.
Right-click on the "oneclickloader.exe" file and choose "Run as Administrator".
Proceed with the installation of Heimdall.
After the installation is complete, you will see the the One-Click UnBrick interface.
Connect the phone to computer via USB and click on the "unsoft brick" button to recover your bricked Samsung android phone.

This method was originally posted via XDA-Developer original thread.

Wednesday, August 13, 2014

blackberry 8310 with damage repair camera

Nokia Asha 300 charge no respons Problem with Jumper Solution

Nokia Asha 300 charge no respons solution

Subscribe to: Posts (Atom)

blogger statistics